kwikopk.blogg.se - Dragonframe camera

You will need a memory card in the camera. Disconnect the usb cable from the camera Double check that you have the correct video source by going to Capture>Video Source>Your Camera.Set the exposure and focus setting in Dragonframe.In the Canon camera the custom white balance needs to be set. With the Canon cameras there is option for manual under the white balance choices. If you have bulbs with a specific kelvin rating try to match that setting.

Use if you are using daylight or daylight balanced bulbs Auto - This setting could change from shot to shot.You need to set the white balance of the camera from within Dragonframe. Many bulbs will come with a specific kelvins label.

The temperature is measured in a unit called kelvins.

Different lights will have different color temperature ranging from red to blue.

Light from a window might change as clouds block the sun.

Watch out for light sources that could change.

Try not to mix different light color temperatures if possible.

Try to have uniform lighting over your artwork Dragonframe is designed to 'talk' to your DSLR in a variety of ways, and it's in the realm of camera communication and camera control that Dragonframe.

Think about the framing of the artwork.

Set Live View shooting AF mode to Quick mode or Live mode (but NOT face detection mode).If you are using Dragonframe Tether with Dragonframe there is a Dragonframe Tether article.ĭragonframe has a support information for a variety of camerasĬheck the following setting on the Canon DSLR cameras.If you are using Dragonframe with a camera you can use the Basic Animation 2D article with the changes below.IF you are using another camera it could be slightly different. This article is based on using Canon DSLR camera. When using Dragonframe at home the initial setup will be different than working in our labs. 5.2.1.3 Set the White Balance in Dragonframe.